Продукти за aiumprofil 80x80 (7)

IRIS is an acrylic cement paint, for interior and exterior use based on acrylic resins. It is recommended for building surfaces such as concrete, plaster, bricks, etc. It has a highly whitening and covering effect and it is also protective against humidity, high temperature and heavy weather conditions.

Protech AC-P Paint based on acrylic resins in aqueous emulsion, for interiors and exteriors, protective lamellar structure which, in addition to having an aesthetic effect, allows maximum filling, transpiration and very high resistance to mechanical and chemical light. The high coverage and expandability make this product extremely easy to apply. The special acrylic resins that compose it allow to obtain a film characterized by a rapid insensitivity to water even during the drying phase, with a consequent reduction of the "snail effect" in the event of atmospheric events. Protective and decorative finish painting of walls, facades, concrete products, plasters, masonry, natural stone, porous substrates in general. For old plasters, pay particular attention to the old pre-existing paints, which must be removed by careful scraping and brushing in order to obtain a healthy and non-friable support; then proceed with the application of Protech Fix AC fixative. When applying on new plasters, it is good practice to insulate the base with acrylic insulator or even better with a white or neutral microemulsion fixative. Avoid windy or cold days when applying. Do not apply on fresh or particularly alkaline substrates, respect a minimum carbonation period of at least four weeks. On large surfaces it is recommended to apply product from the same batch and always proceed wet on wet to avoid signs of recovery. Never operate with temperatures below + 5 ° C. Rainy weather, excessive atmospheric humidity and temperatures below + 8 ° C can greatly compromise drying with the possibility of washing off by rainwater even after several days. . DILUTION (by volume with drinking water) BRUSH 1st COAT: 15% a crossed coat or two coats 12-24 hours apart 2nd COAT: 10%. ROLLER 1st COAT: 10% 2nd COAT: 10%. SPRAY (through specific equipment) 1st COAT: 15/25% 2nd COAT: 15/25%. To avoid filming defects, being resin-based products in aqueous emulsion, the application temperature must be between + 5 ° C and + 35 ° C with relative humidity not higher than 60/70%. Do not apply under the direct action of the sun and wind. Do not apply on fresh or particularly alkaline substrates, respect a minimum drying period of the substrate of at least four weeks. It is also advisable for colored, not to use on large surfaces dyed with different production batches as slight differences between batch and batch are technically possible. Please check the color before application as we will not respond to any disputes regarding the shade of the applied product. From 0.20 to 0.30 liters of Protech AC-P for each square meter of surface to be painted. Pail 14 l

SANDING FFP 0320Flat foam pad - 150 x 150mm - Primer prep FFP 0500Flat foam pad - 150 x 150mm - Base coat prep FFP 0800Flat foam pad - 150 x 150mm - Clear coat prep FFP 1500Flat foam pad - 150 x 150mm - Clear coat fade

Highly effective water repellent, mainly for polymer-sealed concrete products. Provides strong water repellent effect, minimizes capillary water absorption, minimizes efflorescence.

DIM Ltd. - PACIFIC Furniture Equipment Products Floor Protectors Eva Floor Protector Pads 120X240mm Color chart 120x240mm Material: Eva Thickness: 2,5mm *The material is laminated to silicone coated paper by using Hot-Melt glue.

Schneidunterlage PLP Menge/Format: 1 Unterlage 1.450 mm x 1.150 mm Stärke: ca. 2.5 mm Farbe: Schwarz Artikel-Nr:50310001 Hersteller:Diverse

Effective water repellent for concrete products. Strong water repellent effect, reduction of capillary water absorption, minimizes efflorescence.